iStripper Impression

300x200x160 cm pallet:

DSC_0067

Unpacking the crate:

DSC_0070

From the top:

DSC_0080

Assembly – two columns:

DSC_0197

Impressions – stirrer engine, overhead ladder, column with cleaning sections:

DSC_0325

DSC_0344

Impressions – ladder system, product cooler, columns, stirring device and boiler:

DSC_0338

Impressions – a photograph from the back:

DSC_0329

Impressions – uploading the computer program:

DSC_0330

Impressions – no fear of heights aka three brothers on the first floor:

DSC_0333

http://www.iStill.eu

 

10 thoughts on “iStripper Impression

  1. Very very impressive! Truly a thing of beauty… just like everything else in your product line. I love the central mixer with dual columns on each side. Bravo, my friend!!!

    • Thanks, Randy. Yes, I think we managed to think out of the box once more. The twin tower concept makes it possible to install a horizontally working stirrer, closer to the bottom. That means we could make it bigger and revolve at lower speeds, getting minimum heat build-up near that bottom. Like 200% gain in fluid dynamics as compared to a smaller diagonally placed, faster spinning stirring device. And did you see we mounted the “gasses out” tube to the left hand side ladder? And we choose that big long silicone hose to migrate those gasses from the column section to the ladder section. Two reasons for that. First, the tube is flexible, which makes it easier to change the number of cleaning sections, and add / change the iCat. Second, and that’s the main reason, it is a safety fuse. In case the vapour path or liquid path (product cooler) gets blocked, the silicone hose functions as a fuse.

      • Excellent considerations on the output tube!

        On the picture of the back of the still (#8 of 10), what is the tall cylinder attached to the boiler?

  2. Buena muy buenas es para saber cual es el precio de este nuevo destilador . cual es su capacidad . y cuantos litros de alcohol produce por hora muchas gracia.

    • Hi Vic,

      No, a carbon filter is not an integral part of the iStripper design. If you want to carbon filter iStripper output, the easiest way may be to add like a table spoon of carbon for each liter of product and let it sit up to five weeks. Alternatively, a long pipe can be filled with carbon and the output can be funneled through that pipe.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s